Wera VDE Electrical Insulated Screwdriver 6pce Set And Screw Grip
super low price while stocks last from sealants and tools direct https://www.sealantsandtoolsdirect.co.uk/manufacturers/wera_tools/wera_vde_electrical_insulated_screwdriver_6pce_set_and_screw_grip_P28728.html
This 6 piece set includes a selection of 4 Slotted tip screwdrivers and 2 Phillips tip which can also be used on Pozidriv screws.
In addition to these, there are 2 screw grippers in the set.
This is a high quality set of VDE Screwdrivers from Wera, designed for the Professional Electrician but is also ideal for all professional and trade users, whether you are working on electrical items or not, his include’s builders, carpenters, mechanics, service engineers and fitters, kitchen fitters, plumbers and anyone who needs a fine quality tools.
The screwdriver tips have been correctly hardened so as not to damage the screw head and to provide a long service life.
Laser Etched Tips:
An important feature on these screwdrivers is the “Slip Stop tips”, they have precision angled laser cut grooves in the tips which grip the screw head when you are tightening or undoing a fixing.
This etched tip enables the screwdriver to grip the head of the screw or fixing when pressure is exerted and greatly reduces the risk of the screwdriver slipping out of the screw.
Using the Screw Grippers:
The screw grippers provide a real benefit when you are working overhead or are having to stretch to put a screw in.
The screw grippers slide over the shaft of the screwdriver until the sprung loaded jaws are almost level with the tip, you then place the screw between the jaws and slide it up so that tip of the screwdriver is in the end of the screw. This holds the screw and you are able to start screw driving without the screw falling off the end of the screwdriver. as you are tightening the last few turns of the screw, the jaws of the screw gripper automatically open and release the screw so that you can drive it home flush with the surface.
Contents of the Set:
1 – 0.4 x 2.5 x 80mm slotted.
1 – 0.6 x 3.5 x 100mm slotted.
1 – 0.8 x 4.0 x 100mm slotted.
1 – 1.0 x 5.5 x 125mm slotted.
1 – ph1 x 80mm philips.
1 – ph2 x 100mm philips.
2 – Screw Grippers.
Fully tested individually for dielectric strength under a load of 10,000 volts so as to ensure safe working with loads up to 1,000 volts.
For more products please visit our manufacturer page:
https://www.sealantsandtoolsdirect.co.uk/manufacturers/wera_tools_C2804.html
For other great offers on other tool products, please visit:
https://www.sealantsandtoolsdirect.co.uk
Post time: Jun-13-2017