Do NOT use this method for gas springs equipped with a Schrader Valve. If you are unsure which valve you have, please check the IGS website at the address: https://www.industrialgassprings.com/uk/calculate_adjust_diff-tv-rv.asp
On this video we are using a 3mm Allen Key and a small hammer to gently tap on the key. As you can see the valve is not very deep inside and you should be able to use either sides of the Allen Key to reduce the force. If you do not have a 3mm allen key, a smaller one can also be used.
Each time you hear the gas escape, some force is reduced. On small gas springs with a small gas chamber the force goes down quickly so you should go slowly and make as many trials as necessary.
Video from Industrial Gas Springs Limited – Further instructions can be found at the address:
https://www.industrialgassprings.com/uk/calculate_adjust_tv.asp
Post time: Jun-14-2017