Tip: Tight Nozzle when Changing (Trinus)

Here’s another TQDT about what to do if you nozzle is a bit snug when you are trying to change it on the Trinus 3D Printer (https://www.trinus3d.com/).

Quick Overview
After you heat up the nozzle to 200C, remove the filament, then using the Socket Wrench to unscrew it from the Heater Block, if you find it doesn’t come out very easily, you can grab some pliers and pull the nozzle straight out. Using a little twisting motion to help release it from the inner tube.

Here’s a bit more in depth videos if you haven’t change the nozzle before:

Change Nozzle w/LCD: https://vimeo.com/album/4289066/video/195239788
Change Nozzle w/Pango: https://vimeo.com/album/4289066/video/192353307

—————————————————————-

Trinus FB Group: https://www.facebook.com/groups/Trinus3D
Trinus Forums: https://www.kodamaforums.com/
Unofficial Beginners Guide: https://www.kodamaforums.com/phpBB3/viewtopic.php?f=21&t=1627