Raimondi Tile Leveling System

https://www.contractorsdirect.com/Tile-Tools/Tile-Leveling-Systems/brand/Raimondi – Buy Raimondi Tile Leveling System here

Call Contractors Direct at 1-800-709-0002 for More Information

Visit us at: https://contractorsdirect.com/

Like Contractors Direct on Facebook:

https://contractorsdirect.com/facebook

Follow us on Google Plus

https://contractorsdirect.com/google

Follow us on Twitter

https://contractorsdirect.com/twitter

Raimondi Leveling Spacers have been sold in Europe for quite a few years and finally we’re able to introduce them to you!

*If you’re a tile installer, you’re well aware of how difficult it is to properly set flexible, large format, heavy, or low-thickness tiles because, often times, the floor foundation is uneven and/or contains imperfections.
*Tiles that seemed uniformly levelled while first installing them can show differences as the tile adhesive sets, compromising the overall aesthetics of your initial hard work.
*With the Raimondi Leveling Spacers, this potential is no longer a threat to your perfect tile project.
*In addition to ensuring the proper leveling of tiles, this system helps speed the tile setting process.

Features:
*Greatly improves the overall quality of your tile project
*Both installation and removal of the spacers are quick and easy!
*Strudy Tile Wedge holds tiles better than competitors
*Works well with both Wall and Floor projects!
*Tiles are not pulled from the thinset, they’re pushed into it.
*Rather than worrying about voids and coverage, RLS spacers futher enhance your thinset adhesion to your tiles!

Technical Data
*Wedges size: 3-1/2″ Long x 3/4″ Wide.
*Regular Leveling Clip size: 1/8″ to 1/2″ tile, 1/16″ joint.
*Large Leveling Clip size: 1/2″ to 3/4″ tile, 1/16″ joint.
*Minimum required joint: 3/32″, (2mm)
*Tile thickness minimum required 1/8″, (3mm), max 1/2″ (12mm)

How to use
STEP 1: After spreading your tile adhesive, insert leveling spacer underneath the tiles along the 4 sides, use traditional spacers as you normally would to square up the corners. For larger tiles, it may be necessary to “double up”, using 2 leveling spacers for each side.
STEP 2: Set the tile and beat it with a rubber mallet
STEP 3: Use the special traction-adjustable pliers to insert the wedge into the leveling spacers, paying attention not to pass the breakpoint.
STEP 4:Once the tile adhesive has been allowed to set. Remove the leveling spacers with the traction-adjustable pliers, rubber mallet, or kicking them out with your feet.