KINCROME How To: Use a Grease Gun

KINCROME How To: Use a Grease Gun

STEP 1:
Ensure you have the correct parts

Note: Parts included and usage of grease gun may vary slightly between models.

STEP 2:
Unscrew the cap

STEP 3:
Pull back the plunger and lock the rod in place by placing it into the locking notch.

If your model has a locking switch, it will lock automatically.

To release, press down the switch.

STEP 4:
Remove the cap and pop tab from the grease cartridge.

STEP 5:
Insert the grease cartridge into the barrel and push down as far as possible.

Note: You may use the back end of a pair of pliers or a secondary grease cartridge for extra force.

STEP 6:
Secure the cap back on half way and release the lock and plunger.

STEP 7:
Purge the air inside the grease gun by pumping until grease begins to flow from the nozzle.

STEP 8:
Tighten the cap completely.

STEP 9:
Test that the grease gun is working correctly.

STEP 10:
To attach the hose, first wrap the threaded end with Teflon tape to avoid any air pockets forming while operating the grease gun.

STEP 11:
Screw the hose onto the nozzle of the grease gun’s cap.

STEP 12:
Ensure that the grease gun is operating correctly.

Some models will include a flexible hose. The same process can be used to attach to the grease gun cap.

For more information and details of your nearest stockist visit the Kincrome website https://www.kincrome.com.au

Find us on Facebook: https://www.facebook.com/Kincrome