For More Tutorials Visit: https://www.TSOC.com
How to Terminate an RG6 F-TYPE Coaxial Compression Connector
Materials Required:
CT-RG596SS: Coaxial Compression Tool
MST-RGA: Coaxial Cable Prep Tool
MST-502: Side Cutter
TMRG-6CONSSU: RG6 F-Type Coaxial Compression Connector
FT4-RG6WH2: RG6 Coaxial Cable
Step 1:
Cut the specified length of RG6 Coaxial Cable (FT4-RG6WH2) and insert ¾” into the Coaxial Cable Prep Tool (MST-RGA). Rotate in one direction 2-3 turns.
Step 2:
The Coaxial Cable will be scored in 2 stages. Remove the 1st stage exposing the Centre Conductor. Remove the 2nd stage exposing the Foam Insulation and Steel Braid. Fold back the Steel Braid towards the Coaxial Cable.
Step 3:
Insert the Coaxial Cable into the RG6 F-Type Coaxial Compression Connector (TMRG-6CONSSU). Ensure the Centre Conductor is kept straight while firmly pushing until the Foam Insulation reaches the edge of the Compression Connector.
Step 4:
Insert the Compression Connector into the cavity of the Coaxial Compression Tool (CT-RG596SS). Squeeze the handles together until the ratchet system unlocks and remove the terminated Compression Connector.
Step 5:
Trim the Centre Conductor using the Side Cutters (MST-502). Inspect to make sure the Compression Connector is firmly secured to the Coaxial Cable.
Step 6:
Repeat steps 1 through 5 to terminate the opposite end to complete the RG6 Coaxial Cable Assembly.
Post time: Jul-10-2017