2003 2004 2005 2006 2007 2008 2009 Honda Element, Inline 4 cylinder engine, 2.4L K Engine
SKIP to 9:38 to see how I used that tool to remove that stubborn screw.
Diagnosed the passenger-side window. Window regulator is bad.
A video of replacing it will be next.
Diagnosed the overheating engine and ac not cold. Problem was with the cooling fan motor and condenser fan motor not working.
I checked the fuses visually to see it it was burnt and then tested it with a test light to see if it was getting any power. Fuses were good and had power to it.
Then I used jump wires and a battery jump starter to direct power to the motor. I did this to see if the motors are working, in which they were not. So it was confirmed the motors were bad.
I bought the motors in Amazon, see the links below.
Links to buy most and similar tools used in this video:
Cooling Fan Motor: https://goo.gl/jvAh1e
Condenser Fan Motor: https://goo.gl/33EIrq
MetalWorking Set: https://goo.gl/o7RSK8
Clip Removal Tool: https://goo.gl/BK71KV
Plastic Clips: https://goo.gl/xpoYZf
Battery Jump Starter: https://goo.gl/Lm4tKv
Test Light: https://goo.gl/IWrbgP
GearWrench Set: https://goo.gl/03vgcL
Needle Nose Pliers: https://goo.gl/KpE0h8
GoPro Session 4 https://goo.gl/2UCMqQ
The information contained in this video is for general guidance, not responsible for any errors or injuries that you have done. GoPro Session 4 and iPhone 5 was used to do this video.
Please subscribe and thank you for watching.
Follow me on TWITTER: @88bmyvegas and https://lasvegasautoinsider.blogspot.com/
Post time: Jun-18-2017