This was for a 2012 Toyota Prius. You want to do this service every 100-120k miles due to oil and sludge getting trap in the intake manifold, and also preventative maintenance on the PCV valve. Its best to do this service so you can kill 2 birds with 1 stone. Enjoy!
P.S: Also make sure to clean the small ports on the intake manifold like everyone mentioned in the comment section.
Tools:
https://amzn.to/2awcRDO 3/8 ratchet
or
https://amzn.to/2aDYK1X 1/4 electric ratchet
https://amzn.to/2aJy9kF 3/8 short extension set
https://amzn.to/2aYXnIy 3/8 10mm deep socket
https://amzn.to/2aZPqGv 10mm wrench
https://amzn.to/2aCThW4 3/8 12mm socket
https://amzn.to/2axt8Zh 1/4 1,3,6″ extension set
https://amzn.to/2btKbQd 1/4 10mm deep socket
https://amzn.to/2aweq4t Pliers
https://amzn.to/2b5u8I2 Hose clamp tool
https://amzn.to/2aETaN5 Hook and Pick Set (to get those plastic clips)
Drills
Brushes, plastic and brass
Parts:
https://amzn.to/2b5169E Brake clean
Intake manifold gasket
Torque specs:
21 ft. lbs – Intake Manifold bolts and nuts
62 in. lbs – MAP sensor
7 ft. lbs – EGR pipe bolts
15 ft. lbs – Oil dipstick guide sub-assembly bolts
7 ft. lbs – Throttle body bolts
Hand tight
like and share this video!
If you have any questions or concerns, feel free to leave comments on our FB page.
Like us on Facebook
https://bit.ly/nutzaboutbolts1
and SUBSCRIBE!
https://bit.ly/NutzAboutBolts2
Post time: Jul-07-2017