This a video of my m50 shortly after being debaffled and a fresh oil change. To remove the baffles I used a 3 inch hole saw and extention, long pry bar, long locking vise grip pliers, hammer and torch. After cutting the ring with the hole saw I use the pry bar to bend the face plate back for place and more surface to grab with the vise grip then I take the hammer and pry bar bang all around the baffle at the rear of the baffle there are two tabs once tabs are broken heat the baffle directly in the center with the torch until cherry red, lock on vise grips insert long pry bar in the exhaust exit hole for the baffle and wiggle it out.
Post time: Jun-23-2017