This Video covers how to remove inspect and replace a C/V axle and Boot on a 2008 Polaris Ranger. The process is very similar for other like models.
Tools
14 MM Socket
1/2 and 3/8 Ratchet
Axle Nut Socket
Jack &Jack Stand
Wheel Block
Slide Hammer
Vise Grip
C/V Axle Grease
Clamp Crimp Tool
Cutters/Snips
Screw Driver
Pliers, Needle Nose
Brief Overview,
Loosen Wheel Lug Nuts
Remove Dust Cap
Remove Castle Pin and Castle Nut
Raise Vehicle Remove Wheel
Remove Brake caliper and secure.
Remove Lower Ball Joint
Remove Spindle
Remove Axle from strut/Knuckle
Remove C/V boot clamp
Using Slide hammer and castle nut remove C/V Boot
Clean and inspect components reassemble in reverse order.
Post time: Jun-09-2017