Special Price for Metal Drain Cleaner for pipelines for Turkey Manufacturer

How to Replace a Shower Head From Canadian Tire

See all Shower Heads: https://www.canadiantire.ca/AST/browse/6/Tools/Plumbing/ShowerHeads.jsp

Updating your bathroom décor with a new shower head is easy to do.

Here’s what you’ll need to do the job.
•A multi-bit screwdriver (https://www.canadiantire.ca/AST/browse/6/Tools/HandTools/MultiTipScrewdrivers.jsp)
•Plumbers slip-joint pliers (https://www.canadiantire.ca/search/search_results.jsp?bmForm=form_endeca_search&quick_search_term=Plumbers+slip-joint+pliers)
or
•an adjustable wrench (https://www.canadiantire.ca/AST/browse/6/Tools/Wrenches/AdjustableWrenches.jsp)
•Small wire brush (https://www.canadiantire.ca/search/search_results.jsp?bmForm=form_endeca_search&quick_search_term=wire+brush)
•Teflon tape (https://
www.canadiantire.ca/search/search_results.jsp?bmForm=form_endeca_search&quick_search_term=Teflon+tape)
•…and your new shower head

Start by protecting the bathtub or shower enclosure with an old towel or sheet.
Next make sure the faucet is off.
Remove the old shower head. Remember to hold on to the shower arm when removing the shower head
Clean any old Teflon tape or sealant off the pipe by using the wire brush.
Now apply two or three wraps of teflon tape to the pipe threads.
Install the new shower head hand tight. Some shower heads require additional tightening.
In that case give it a quarter turn with the slip-joint pliers. Put a cloth on the shower head nut so the pliers won’t mark the finish.
Remove the protective covering you put on the floor of the shower stall or tub.
Turn the water on and check the flow from the new shower head. Check for leaks and you’re done.
You can get everything you need to install a new shower head…
…at Canadian Tire

https://www.toolbank.com/0/p/KPX1386200

These KNIPEX VDE multifunctional installation pliers will grip flat and round material, for bending, deburring, cutting cable, stripping and crimping end sleeves (ferrules).

These pliers feature the basic functions of the four other tools which are essential for electrical installation: snipe nose side-cutting pliers, wire strippers and crimping pliers for end sleeves (ferrules) and cable shears. This four-fold functionality in one pair of pliers is ideal for construction and industrial electricians who often have to travel around from one jobsite to another.

These pliers offer 6 functions in one pair of pliers:
1. Smooth surfaces near the tips grip single cores without damaging them.
2. Serrated gripping surfaces and pipe grip for gripping flat and round material.
3. Clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes.
4. Stripping holes for conductors of 0.7 – 1.5 mm² and 2.5 mm².
5. Crimp die for end sleeves (ferrules) 0.5 – 2.5 mm².
6. Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / dia. 15 mm.