Holiday sales 7-PCS Anti-static Tweezer Sets for Chicago Importers

There’ll be 8 of you joining us in the hangout. If you are interested in being one of the 8 sign up here: https://goo.gl/ANPzO6

6050 Installation Transcript
Hello and Welcome to Korky Toilet Repair
Today we will show you how to install all Styles of Korky StrongARM Universal tank levers
If you have a Mansfield brand toilet with a tower flush valve, see the instructions later in the video
We’ll start by detaching the chain from the lever arm and removing your old lever.
Remove the hook and the two red locking clips and set them aside for later.
Separate the elbow and arm.
Then remove the mounting nut.
The mounting nut is reverse threaded, right for loose, left for tight
The handle can be mounted in various ways: angled mount, front mount, side mount, and right handed mount.
Insert the handle assembly into the tank hole and secure the nut on the inside of the tank
If you prefer, the handle can be mounted vertically.
Attach the elbow at the angle shown.
Position the arm parallel to the front of the tank then attach the lever arm to the elbow.
Insert the locking clips
The clips can be installed on either side.
Remove the current hook from your chain and use the provided hook to clip the chain to the lever with minimal slack
Do not pull the lever arm down to attach the chain.
You may need to cut the excess chain.
If the chain is short of your lever arm try adjusting the elbow’s angle like this.
Replace the lid & flush your toilet to make sure the toilet bowl clears properly.
The lever should not touch any other parts in your toilet tank. If your lever arm is hitting the lid adjust the elbow angle
This section is for Mansfield Tower flush valves only:
Twist off the valve top of your Mansfield flush valve
Unhook and remove your old lever.
Remove the hook and the top red locking clip, set aside for later.
Remove the elbow and arm and the mounting nut.
Insert the handle assembly into the tank hole and secure the mounting nut on the inside of the tank.
Reattach the valve top
Without lifting the flush tower thread the arm through the valve and attach the lever arm to the handle assembly
Insert the locking clip
If your lever doesn’t reach it may require a chain.
You can purchase a chain or call us for a free chain at 1 800 528 3553
Use pliers to clamp the open link of the chain to the flush tower
With your chain attached, follow the instructions from the beginning of the video
Congratulations, you have successfully installed your new Korky StrongARM Universal tank lever.
Thank you for choosing Korky.
If you have any questions or need further assistance with your installation, please visit our website or call us at 1 800 528 3553.