26 Years Factory 9-PCS Hex Key Sets packaged by folded plastic frame for Guyana

Please read the whole description – there are updates –

TOOLS
* Engineer PA-09 Crimping Tool
* Paladin Grip P20 Wire Stripper

Picoblade connectors on digikey (2 position – just browse for larger housings)

https://www.digikey.com/product-detail/en/molex-llc/0510210200/WM1720-ND/242842

Crimps:

https://www.digikey.com/product-detail/en/molex-llc/0500588000/WM1775TR-ND/634442

(update – 7/16 – I’m a big fan of silicone wire – grab 28awg and 30awg lengths from adafruit industries – and if you source wire that you like – please message me so I can update the description for the benefit of others.

* 28 AWG Wire – search on ebay for ” 28 AWG Stranded UL1007 ” wire

https://www.ebay.com/itm/Stranded-indoor-UL1007-Wire-Cable-18AWG-30AWG-Cord-DIY-Fit-LED-Lamp-Light-/281502807368?var=&hash=item418adff548:m:meDef-EEdKSnhdZHyaMxP-Q

FPV Connector Thread on FPVLab.com

https://fpvlab.com/forums/showthread.php?8921-Official-Connector-Thread

***

This is a video response to a request that came in on the forum. Just like any other delicate task, to do a high quality job, you need time, technique and the right tools to get the job done.

In this video I cover some techniques for crimping common micro connectors for a lot of components we use in FPV, like video systems, flight controllers and component to component connections.

Let me know if that was useful or if you’d like any other details on anything discussed in this episode.

How to Replace a Shower Head From Canadian Tire

See all Shower Heads: https://www.canadiantire.ca/AST/browse/6/Tools/Plumbing/ShowerHeads.jsp

Updating your bathroom décor with a new shower head is easy to do.

Here’s what you’ll need to do the job.
•A multi-bit screwdriver (https://www.canadiantire.ca/AST/browse/6/Tools/HandTools/MultiTipScrewdrivers.jsp)
•Plumbers slip-joint pliers (https://www.canadiantire.ca/search/search_results.jsp?bmForm=form_endeca_search&quick_search_term=Plumbers+slip-joint+pliers)
or
•an adjustable wrench (https://www.canadiantire.ca/AST/browse/6/Tools/Wrenches/AdjustableWrenches.jsp)
•Small wire brush (https://www.canadiantire.ca/search/search_results.jsp?bmForm=form_endeca_search&quick_search_term=wire+brush)
•Teflon tape (https://
www.canadiantire.ca/search/search_results.jsp?bmForm=form_endeca_search&quick_search_term=Teflon+tape)
•…and your new shower head

Start by protecting the bathtub or shower enclosure with an old towel or sheet.
Next make sure the faucet is off.
Remove the old shower head. Remember to hold on to the shower arm when removing the shower head
Clean any old Teflon tape or sealant off the pipe by using the wire brush.
Now apply two or three wraps of teflon tape to the pipe threads.
Install the new shower head hand tight. Some shower heads require additional tightening.
In that case give it a quarter turn with the slip-joint pliers. Put a cloth on the shower head nut so the pliers won’t mark the finish.
Remove the protective covering you put on the floor of the shower stall or tub.
Turn the water on and check the flow from the new shower head. Check for leaks and you’re done.
You can get everything you need to install a new shower head…
…at Canadian Tire