18 Years Factory 10-PCS Hex Key Sets packaged by spring ring for Lithuania

***VISIT OUR SPONSORS***
https://www.traderadiators.com | https://www.grahamplumbersmerchant.co.uk | https://www.buteline.com/uk | https://www.adey.com

***WEBSITE***

https://www.plumberparts.co.uk

***Facebook***

https://www.facebook.com/profile.php?id=100001119410854

***Twitter***

https://twitter.com/#!/plumberparts

Sometimes it is as easy as tightening the fitting up with a spanner and a pair of grips BUT sometimes you will need to strip the fitting down and use sealant or even replace the olive. Sometimes you will ahve to replace the whole fitting or even a small part of the pipe. Which made me think that we need to do a video on how to fix compression fittings. Now, as you know, we’ve done a video a long, long time ago about how compression fittings work. That’s great. But what about if they leak. So we’re going to have a look very quickly if you’ve got a weeping compression fitting, how you can fix them and what you can do to solve the problem.
As we all know, compression fittings work in a really simple way. We’ve got an olive, a tapered insert, and a nut with a taper on the inside. When they tighten up those 2 tapers work on that olive and compress it on to the pipe to create a watertight seal. So, what do we do if this is leaking? First thing’s first, if you think that you’ve got a leaking compression fitting like that. The first thing I would try and do is see if you can actually nip it up a little bit. Get yourself a pair of grips to grip the inside part here, the actual main body of the fitting. And then use a pair of adjustables to tighten it up. When you’re using grips always grip in the opposite direction to where you are tightening up So, this would be wrong. To tighten this fitting up, the grips are the wrong way round. So you want the grips to be this way round like so. Then you can get your adjustable on the fitting like that and tighten it up. Give it an extra nip. Often that will stop a leak on a compression fitting. Sometimes though it doesn’t. After you’ve done that, get yourself some tissue, wipe it down, fill the system up or whatever you’re working on with water again and test for leaks. If you still find it’s leaking, there’s 3 or 4 other things we can do to stop this fitting from leaking altogether.
So the next thing we could do is actually strip the fitting down you will see then that you’ve got a nut with your bitten on olive nut with your bitten on olive,if you don’t want to change the fitting and if you can’t change the olive, you can’t get a hacksaw or something like that, there’s a couple of things you can do that might seal it
if you don’t want to change this olive the first thing i would do is use some jointing compound
this is pretty old jointing compound but it’s going to do for demonstration purposes today, so get yourself some lovely jointing compound all this is is linseed oil and chaulk and you get your compound and you splodge it onto your fitting and then push your fitting back together again and tighten it up as you would normally. If you haven’t got any jointing compound you can also use PTFE tape. Right so we’ve got our olive here and remember this is only if you can’t change the olive or the fitting. A little bit of PTFE tape, now,PTFE tape is pretty cool stuff! There’s a knack to useing it try and have your tape coming out at this angle like this, lay it across the olive, with your thumb, Just wrap it round, front and back of the olive, just like so, Make sure when you put the PTFE on the olive that the PTFE winds in the direction that the nut tightens up. If it goes the other way you’ll find that the PTFE splurges out and you won’t be able to seal the leak. So now you’ve got a nicely covered up olive there. Push the fitting back together, and then tighten up. I have never in all my years of plumbing had one of these leak after doing PTFE around the olive.
Lets have a look at how you change the olive. The Way to get an olive off if you don’t have an olive splitter you might as well use a junior hacksaw and a very steady hand. Because you do not want to score the pipe. The good thing is you can get a junior hacksaw cut diagonally like this across the olive but before you actually cut fully through the olive, you can get a nice little thin slotted screwdriver and twist the olive apart, and be easily removed from the pipe. Try as best you cannot to score the pipe. Now you should be able to pop your screwdriver in there and remove the olive. Now looking at the condition of the pipe, it’s not too bad. At this point you can have problems that may mean replacing the pipe
If there is a slight ripple in the pipe its going to be very difficult to re-seal that bit of pipe. So new olive, old fitting on. Re-tighten up. Sometimes you’ll be able to slacken off the fitting and just grab a pair of grips pop that round the olive and just wangle it off. But then sometimes you’re going to have to resort to this method to get the olive off.
DIY

lyrics

i do not own this video rights go to Swishahouse/Warner Bros.

[Hook - 2x]
Still Tippin’ on four fours, wrapped in four vogues
Tippin’ on four fours, wrapped in four vogues
Tippin’ on four fours wrapped in four vogues
Pimping four hoes and I’m packing four fours

[Slim Thug]
Now look who creeping look who crawling still balling in the mix
It’s that six six long dick slim nigga sticking your chick
Pullin tricks looking slick at all times when I’m flipping
Bar sipping car dipping grand wood grain gripping
Still tippin’ on four fours wrapped in four vogues
Pimping four hoes and I’m packing four fours
Blowing on the endo Game Cube Nintendo
Five percent tint so you can’t see up in my window
These niggaz don’t understand me cuz I’m Boss Hogg on candy
Top down at Maxi’s wit a big glock nine handy
Pieced up creased up staying dressed to impress
Big boss belt buckle under my Mitchell and Ness
Oh, Gucci shades up on my braids when I Escalade
When I’m riding Sprewells sliding like a escapade
I got it made the big boss of the north
Ain’t shit changed I still represent Swisha House (Ha!)

[Hook - 2x]

[Mike Jones]
Four fours I’m tippin’
Wood grain I’m gripping
Catch me lane switching with the paint dripping
Turn your neck and your dame missing
Me and Slim we ain’t tripping I’m finger flipping and syrup sipping
Like do or die I’m po’ pimping Car stop rims keep spinning
I’m flipping drop with indvisible tops
Hoes bop when my drop step out
I’m shaking the block with four eighteens’
Candy green with eleven screens
My gasoline always supreme
Got do-do the brown with a pint of lean
It takes grinding to be a king
It takes grinding to be a king
First Round Draft Picks coming
Who is Mike Jones coming
Slab shining with the grill and woman
Slab shining with the grill and woman
I’m Mike Jones (Who) Mike Jones the one and only you can’t clone me
Got a lot a haters and a lot of homies some friends and some phony
Back then hoes didn’t want me Now I’m hot hoes all on me
Back then hoes didn’t want me Now I’m hot hoes all on me
Back then hoes didn’t want me Now I’m hot hoes all on me
(I Said!) Back then hoes didn’t want me Now I’m hot hoes all on me

[Hook - 2x]

[Paul Wall]
What it do it’s Paul Wall I’m the people’s champ
My chain light up like a lamp cuz now I’m back with the camp
I’m crawling similar to an ant cuz I’m low to the earth
People’s feelings get hurt when they figure out what I’m worth
I got eighty fours poking out at the club I’m showing out
I’m a player ain’t no doubt hoes want to know what I’m bout
Biggest diamonds off in my mouth princess cuts all in my chain
Wood grain all in my range dripping stains when I switch lanes
Switched the name It’s still the same Swisha House or Swisha Blast
Mike Jones he running the game and Magnificent bout his cash
Michael Watts he made me hot hard work took me to the top
G. Dash took me to the lot he wrote a check and bought a drop
I got the internet going nuts
But T. Farris got my back so now I’m holding my nuts
It’s Paul Wall baby what you know bout me
I’m on that five nine Southle baby holla at me

[Hook - 2x]