100% Original Factory 30-PCS Hex Key Sets packaged by BMC surface by Black Oxide Factory in Ireland
Short Description:
Product Detail
Product Tags
We are convinced that with joint efforts, the business between us will bring us mutual benefits. We can assure you product quality and competitive price for 100% Original Factory 30-PCS Hex Key Sets packaged by BMC surface by Black Oxide Factory in Ireland, Our mission is to help you create long-lasting relationships with your clients through the power of promotional products.
Basic Information
■Model Number: RL-NLJ015
Additional Information
■Material: 45# Carbon Steel
■Size: 0.028″-3/8″, 0.7mm-10mm
■Surface Treatment: Black Oxide
■Heat Treatment: Optional
■Package: BMC + Double Blister Card
■OEM: Acceptable
■HS Code: 8204110000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Ningbo Rilong Hardware Tools Factory can provide various kinds of Hex Key with different sizes and packages.
Product Image
How to clean a throttle body on 7th Gen Civic.
Tools required:
10 MM socket
philips screw driver
flat screw drivier
needle nose pliers
carb cleaner
q tips
rags
may help to have an impact driver
- I am not very car savy over all but this project was rather easy; just time consuming. Make sure you take your time and don’t rush and I’m sure all skill levels can do it.
give me a thumbs up if you like!! or a thumbs down if you don’t! cheers.
This video shows you how to make your own backless (Iyengar) yoga chair starting with a folding metal chair purchased at Wal-Mart for around $10. You’ll need a large flathead screwdriver, a pair of vice grips, a grinder for metal (if you don’t have a grinder try to rent or borrow one), eye protection like shop goggles, a dust mask, work gloves, matte black spray paint, Windex or other cleaner, rags or paper towels, masking tape to prevent scratching the original paint, a work table is handy, a hacksaw, some boxes for props, 2 nylon plugs (or something similar to plug holes in the front legs–epoxy will work too), and a blanket or two to prevent scratching the chair’s original paint. Some steps are repeated with variations to show you options.
Step 01 – Bending & removing the back plate
Step 02 – Removal of back plate
Step 03 – Cutting through upper spot welds on front support bar
Step 04 – Removal of front support bar
Step 05 – Removal of front support bar
Step 06 – Grinding spot welds on front leg
Step 07 – Grinding spot welds on front leg
Step 08 – Grinding spot welds on front leg
Step 09 – Grinding side bar (4 spot welds each side)
Step 10 – Grinding and finishing top bar
Step 11 – Insertion of nylon hole plug into front leg
Step 12 – Wipedown of underside of seat to remove metal fragments
Step 13 – Wipedown with Windex (paint prep)
Step 14 – Touchup on front two legs
Step 15 – Touchup on top bar
Step 16 – Touchup on 2 chairs (incl tape removal)
Step 17 – Touchup with black spray paint (using mask)
