30 Years Factory Various kinds of Industrial Brushes for Myanmar Manufacturer

I was asked to remove the tire from a rim using manual hand tools. This was a good experience to have. I have worked in an automotive repair shop and changed tons of tires with machines and special tools but never by hand.

First you have to remove the tire valve with a valve remover tool. This lets the air out of the tire.

Next you have to unseat the tire from the rim. This is easier if you have some sort of a press like the homemade one shown in this video.

Break the seal on both sides of the tire.

Now you need a couple tire removal tools to get the tire off the rim. This can be a tough job depending on the size and stiffness of the tire you are working on.

Replacing the new tire on the rim goes just the same way as you take off the old tire. Using the tire removal tools you have to slip the new tire onto the rim.

If it is a larger tire then it is best to seat the tire on the rim before putting in the valve. Inflate the tire until the tire seats properly on the rim. Then you can insert the valve into the valve stem and inflate the tire to the proper PSI.

Follow The Off Grid Project and get your home off the grid on a budget

https://www.TheOffGridProject.com

Join The Off Grid Project and The Do It Yourself World forum and share your ideas, tips and projects.

https://www.thediyworld.com/forum

The Off Grid Project is presented by The Do It Yourself World.

https://www.TheDIYworld.com

Experiments and projects in off grid living, alternate energy, survival, hiking and more.

Please read the whole description – there are updates –

TOOLS
* Engineer PA-09 Crimping Tool
* Paladin Grip P20 Wire Stripper

Picoblade connectors on digikey (2 position – just browse for larger housings)

https://www.digikey.com/product-detail/en/molex-llc/0510210200/WM1720-ND/242842

Crimps:

https://www.digikey.com/product-detail/en/molex-llc/0500588000/WM1775TR-ND/634442

(update – 7/16 – I’m a big fan of silicone wire – grab 28awg and 30awg lengths from adafruit industries – and if you source wire that you like – please message me so I can update the description for the benefit of others.

* 28 AWG Wire – search on ebay for ” 28 AWG Stranded UL1007 ” wire

https://www.ebay.com/itm/Stranded-indoor-UL1007-Wire-Cable-18AWG-30AWG-Cord-DIY-Fit-LED-Lamp-Light-/281502807368?var=&hash=item418adff548:m:meDef-EEdKSnhdZHyaMxP-Q

FPV Connector Thread on FPVLab.com

https://fpvlab.com/forums/showthread.php?8921-Official-Connector-Thread

***

This is a video response to a request that came in on the forum. Just like any other delicate task, to do a high quality job, you need time, technique and the right tools to get the job done.

In this video I cover some techniques for crimping common micro connectors for a lot of components we use in FPV, like video systems, flight controllers and component to component connections.

Let me know if that was useful or if you’d like any other details on anything discussed in this episode.